Speed Gate GT-60
The GT-60 is a short-body speed gate at 450 mm long, built for entrances where floor space rules out a standard-length unit. It uses the same drive technology as the GT-70, handles passage widths from 600 to 1200 mm, and moves up to 45 persons per minute. Best suited to sites with moderate tailgating risk or staffed supervision, where the compact footprint matters more than maximum detection range.
Speed Gate GT-70
The GT-70 is a 1400 mm speed gate built for entrances where tailgating detection needs to be taken seriously. The longer body gives the control board a wider detection window to distinguish two people from one, and the sensor coverage is sufficient to make that call reliably in mixed-traffic environments. 55 persons per minute, passage width from 600 to 1100 mm, and IP65 available for outdoor use.
Speed Gate GT-250
The GT-250 is the only gate in our range that reaches 1200 mm passage width, which is also the maximum width for a fire-egress lane under standard inspection requirements. That single fact makes it the default choice whenever a wide main entrance is needed without triggering additional fire-safety planning. A Gatech-developed planetary motor handles the longer arm load reliably over high cycle counts, and a microwave anti-theft module is available for grocery and retail installations.
Speed Gate Denia
The Denia is a short-body gate at 280 mm deep with fully retracting arms, built for entrances where depth is the constraint. It is particularly popular in grocery and retail store entrances where saving floor space matters more than maximum tailgating detection range. A microwave sensor on the exit side keeps outbound traffic flowing freely without any interaction, and QR code reader integration makes it a clean fit for self-checkout lanes.
Speed Gate HG 02
The HG 02 is a flap gate, which means the arms retract vertically into the body rather than swinging open to the sides. This allows the closing signal to be sent the moment a person crosses the arm line, rather than waiting until they have cleared the full swing arc. In practice that fraction of a second makes the gate harder to tailgate than a swing-arm design at equivalent settings. RGB LED illuminated glass arms, 304 stainless steel body, and connection to any access control system.
Speed Gate GT-33
The GT-33 is a full-height speed gate portal with acrylic swing panels and a passage width configurable from 600 to 1200 mm. It combines the physical deterrence of a full-height barrier with the open visual impression of a glass-panel speed gate, which makes it the right choice when 1200 mm clear passage is required without compromising on aesthetics or security level. Suitable for gyms, corporate lobbies and high-security facilities. Indoor use.